T-ISS  Drip Stop Tape

 

Use  and Features
Simple to use. Drip Stop Tape is not using any  adhesive components. It  will not stick to the hand.
Drip Stop Tape is made to stick his own components with a full cure time of 20~30 minutes when overleap taped
approximetly width to underlayer material (by making about 2~3mm narrow of width of tape).

Applicable to execute of taping wet areas even pressurized leaking  up to about 2~3kg/cm2  and it will cure even in water.
When being used in wet areas, it must winded by hand very tightly in order to avoid invading the water or trash between the layers.
Applying for various materials/uses.

Stop Leak Tape is excellent for protecting a water leakage but will also prevent the salt injury and the corrosion under the ground and/or electric insulation. It can be used on various metals, plastics and/or GRP,  resins and  materials or line materials etc.

        

 Tape specification

For using
To prevent a leakage and splashes of  liquid, air and powder etc, from piping joints and connections.
Corrosion prevention of exposure metal portion or metal pipe, underground pipe forward water seawater bath, etc.
Excellent weather resistant and UV stabile  can be used for for all cable, insulating cover for cable, treatment and repairs etc.


Product information for Drip Stop Tape

Product No.

Size of Product

Qty/Box

IMPA Number

 

TWL(mm)

 

 

DS1025

0.5mm25mm10m

20 rolls

812491

DS1038

0.5mm38mm10m

15 rolls

812492

DS1050

0.5mm50mm10m

10 rolls

812493

Composition, Specification and Character for Tape

1.Materialcomposition

Test items

Results

Test Method

Tensile strength

32,8kg/cm2

 

Elongation at brake

435%

 

Volume resistivity

6,1 x 10,15

 

Dielectric strength

21kV/mm

ASTM D4325

Dielectric constant

0,03

 

Dissipation factor

2,01

 

Ozone resistance

good

 

UV resistance

good

 

 

MSDS