SlipStop is a mineral coated plastic film, one side pressure sensitive adhesive, protected by a removable liner.
SlipStop use: To be applied to surfaces where there may be a safety hazard due to slippiness either in or out of doors.
SlipStop data: Back carrier : PVC 0.1mm +/- 0.01mm
Thickness: 0.8mm +/- 0.2mm (#60 grit)
Holding medium:Solvent acrylic adhesive
Adhesion to steel: 1500g/25mm
Holding power : 8 hours/20mm2/kg
Tensile strength: 6kgs/25mm
Elongation at break: 25%
Static anti-slip coefficient of friction: ＞ 0.5
Application temperature: 5℃upto 50℃
Resistance to water: Excellent
Resistance to grease: Excellent
Staining of adhesive: No evidence of migration
APPLICATION: Any non-porous surface void of dust, oil, water & other
The information above represents average values resulting from production samples
And does not constitute a guarantee to the final performance. Each application should be tested in advance by the users.
SOLAS tape, SOLAStape,
retroreflective, marine tape, spray stop, leak stop, pipe marking, SOLAS Tape,
SOLAS Reflective Tape, SOLAS Safety Reflective Tape, Safety of Life at